Delta OHM 3 Axis Ultrasonic Anemometer

ICP DAS I-7024 CR

Delta OHM

Marka Delta OHM
Ürün 3 Axis Ultrasonic Anemometer
Ürün Kodu ICP DAS I-7024 CR
Artikel -
Ülke United States (US)
Durumu Yeni / Kullanılmamış

Teknik Bilgi


Output quantities Anemometric Wind speed and direction, U-V-W components, sound speed, sonic temperature Meteorological (HD2003 Model) Pressure, Temperature, Relative Humidity Heading Compass with magnetic azimuth Moving avarages 1÷60 sec / 1÷60 min Ultrasonic rate 60Hz Wind speed Unit m/s, cm/s, km/h, knots, mph Range 0 ÷ 70 m/s (252 km/h) Resolution 0.01 m/s Accuracy ± 1% of reading Wind direction Range Azimuth: 0 ÷ 360° Elevation: ± 60° Resolution 0.1° Accuracy ± 1 ° Sound Speed Range 300 ÷ 380 m/s Resolution 0.01 m/s Accuracy ± 1% of reading Sonic Temperature Range -40 +60°C Resolution 0.1 °C Accuracy ± 1 °C Compass Range 0÷3600 /10° Resolution 0.1° Accuracy ± 1° Digital Outputs Quantities Anemometric and compass. (HD2003 Model) Pressure, Temperature, Relative Humidity Communications RS232 and RS422 full duplex, RS485 MODBUSRTU, RS485 Multidrop and AoXnd half duplex Baud rate 9600 ÷ 115200 bit/sec Output Rate Normal mode (Slow): 1 ÷ 3600 sec Digital High Frequency (Fast): fixed 50Hz Analog Outputs Quantities 5 to be selected from output quantities (anemometric, compass, meteo). Range 0-20mA, 4-20mA, 0÷1V, 0÷5V, 0÷10V, 1÷5V Resolution 14 bits max Analog Outputs Extended (With ICP DAS I-7024® module On request when placing the order) Quantities up to 12 to be selected from output quantities (anemometric, compass, meteo). Range 0-20mA, 4-20mA, 0÷5V, 0÷10V Resolution 14bits Output Rate Normal mode (Slow): 1 ÷ 3600 sec Analog High Frequency (Fast) : from 5Hz to 20Hz depending on the baud rate Power Supply Range 12 ÷ 30 Vdc Power < 2W - (Typically: 110mA @ 15Vdc) < 6W - Models with heaters and environment temperature not lower than –10 °C General Weight HD2003 : 2.1Kg HD2003.1 : 1.5Kg Temperature Range -40 +60°C Precipitation Operation ensured up to 300mm/hr of water Humidity 0% ÷ 100% RH

Orijinal Ürünler
Çoklu Lojistik Seçeneği
Dünyanın Her Yerine Tedarik
Uzman Ekip Kadrosuyla
Bize 7/24 E-Posta gönderebilir veya Canlı Destekten Sorularınızı Sorabilirsiniz.

İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.

info@fabrikaparca.com

Türkiye' nin Her Yerinden44448 19
İzmir
Bursa
İstanbul
Adana

ÇALIŞMA SAATLERİ

Pazartesi - Cuma

08:00 - 18:00

Hafta sonu kapalı.

Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.