Gefran TPF-B25D - Industrial

Accuracy (1)
Resolution
Overpressure (without degrading performance) (2)
Pressure containment (Burst test) (3)
Wetted parts
Body materials
Power supply
Common mode voltage
Output impedance
Load impedance
Insulation resistance
Zero offset and span setting
Output voltage (sensitivity)
Calibration signal
Long term stability
Operating temperature range (process) (5)
Compensated temperature range (4)
Storage temperature range
Temperature effects over compensated range (zero-span)
Mounting position effects
Humidity
Weight
Mechanical shock
Vibrations
Ingress protection
H ± 0.2% FSO typical (± 0.3% FSO max) 0-60...0-1000 bar
M ± 0.5% FSO typical (± 0.6% FSO max) 0-10...0-50 bar
Infinite
3 x Full Scale (max 2000 bar)
4 x Full Scale (max 2000 bar)
Fluid compatible with Inox 17-4PH
Inox AISI 304 Stainless Steel and Nylon 66GF35V0
10 (max 15) Vdc/ac RMS
Typical 5V @ 10V supply
350 Ω (±1)
> 1000 KΩ
> 1000 MΩ @ 50Volt
± 0.5% FSO
10...40 bar / 150...500 psi - 1.5 mV/V nominal
50...160 bar / 750...1500 psi - 2 mV/V nominal
200...1000 bar / 3000...15000 psi - 3 mV/V nominal
80% FSO nominal (see connection diagram)
0.2% FSO/Year
-40...+120°C (-40...+248°F)
-20...+85°C (-4...+185°F)
-40...+125°C (-40...+257°F)
± 0.01% FSO/°C typical (± 0.02% FSO/°C max.) > 50 bar (750 psi)
± 0.02% FSO/°C typical (± 0.03% FSO/°C max.) ≤ 50 bar (750 psi)
Negligible
Up to 100% HR non condensing
110 gr. nominal
100g/11msec, according to IEC 60068-2-27
20g max @ 10...2000Hz, according to IEC 60068-2-6
IP65/IP66/IP67