Gefran IE PLc-P75D - Melt High Temperature

Accuracy (1) H <±0.25%FSO
M <±0.5%FSO
Resolution 16 Bit
Measurement range 0..100 to 0..1000bar
0..1500 to 0..15000ps
Maximum overpressure
(without degrading performances)
1.5 x FS (maximum pressure
1200bar/17400psi)
Measurement principle Piezoresistive
Power supply 13...30Vdc
Maximum current absorption 23 mA
(40 mA with optional relay)
Output signal Full Scale FSO 20mA
Zero balance
(tollerance ± 0.25% FSO) 4mA
Zero signals adjustment
(tollerance ± 0.25% FSO) “Autozero” function
Response time (10...90% FSO) 8ms
Output noise (RMS 10-400Hz) < 0.025% FSO
Calibration signal 80% FSO
Supply reverse polarity protection Yes
Compensed temperature range housing 0...+85°C
Operating temperature range housing -30...+85°C
Storage temperature range housing -40...+125°C
Maximum diaphragm temperature 350°C / 660°F
Zero signal variation due to process temperature variation in range (20-350°C) < ± 1,2%FSO
Span signal variation due to process temperature variation in range (20-350°C) < ± 1%FSO
Std contact diaphragm with process 15-5 PH GTP+
Thermocouple (model IE2) STD: type “J” (isolated junction)
type “K” (on request)
Protection degree
(with 6-pole female connector) IP65
Electrical connection
Conn. 6-pin VPT07RA10-6PT
(PT02A-10-6P) Conn. 8-pin
(Binder) M16 DIN/EN45326
(09-0173-00-08)