Gefran IN-P05C - Melt High Temperature

Accuracy (1) H <±0.25%FSO
M <±0.5%FSO
Resolution 16 Bit
Measurement range 0..100 a 0..1000bar
0..1500 a 0..15000ps
Maximum overpressure
(without degrading performances)
1.5 x FS (pressure max
1200bar/17400psi)
Measurement principle Piezoresistivo
Power supply 15...30Vdc N, C, B, M,
Maximum current absorption 25mA
Insulation resistance (at 50Vdc) >1000 MOhm
Output signal Full Scale FSO 5Vdc (M) - 10Vdc (N)
5,1Vdc (B) - 10,1Vdc (C)
Zero balance
(tollerance ± 0.25% FSO)
0Vdc (M, N)
0.1Vdc (B, C)
Zero signals adjustment
(tollerance ± 0.25% FSO) Autozero” function
Maximum allowed load 1mA
Response time (10...90% FSO) 8ms
Output noise (RMS 10-400Hz) < 0.025% FSO
Calibration signal 80% FSO
Output shot circuit and supply reverse
polarity protection YES
Supply from output protection YES
Compensed temperature range housing 0...+85°C
Operating temperature range housing -30...+85°C
Storage temperature range housing -40...+125°C
Maximum diaphragm temperature 350°C / 660°F
Zero signal variation due to process
temperature variation in range (20-350°C) < ± 1,2%FSO
Span signal variation due to process
temperature variation in range (20-350°C) < ± 1%FSO
Std contact diaphragm with process 15-5 PH GTP+
Thermocouple
(Model IN2)
STD: Tipo “J” (isolated junction)
Tipo “K” (on request)
Protection degree (with 6-pole female
connector) IP65
Electrical connection Conn. 6-pin VPT07RA10-6PT
(PT02A-10-6P)