Gefran IX-B01C - Melt High Temperature

Accuracy (1) H <±0.25%FS
M <±0.5%FS
Resolution 16 Bit
Measurement range 0..10 to 0..1000bar
0..150 to 0..15000psi
Maximum overpressure
(without degrading performances)
1.5 x FS (maximum pressure
1200bar/17400psi)
Measurement principle Piezoresistive
Power supply 10...30Vdc
Maximum current absorption 23mA
Insulation resistance (50Vdc) >1000 MOhm
Output signal Full Scale FS 20mA
Zero balance
(tollerance ± 0.25% FS) 4mA
Zero signals adjustment
(tollerance ± 0.25% FS) “Autozero” function
Maximum allowed load See diagram
Response time (10...90% FS) 8ms
Output noise (RMS 10-400Hz) < 0.025% FS
Calibration signal 80% FS
Output short circuit ingress and
reverse polarity protection YES
Compensed temperature range housing 0...+85°C
Operating temperature range housing -20...+85°C
Storage temperature range housin -40...+125°C
Maximum diaphragm temperature 350°C / 660°F
Zero signal variation due to process
temperature variation in range
(20-350°C)
< ± 1,2%FS
Span signal variation due to process
temperature variation in range
(20-350°C)
< ± 1%FS
Std contact diaphragm with process 15-5 PH GTP+
Thermocouple (model IX2) STD: type “J” (isolated junction)
type “K” (on request)
Protection degree
(with 6-pole female connector) IP65
Electrical connection
Conn. 6-pin VPT07RA10-6PT
(PT02A-10-6P)
Conn. 8-pin PC02E-12-8P
Cable output