Gefran K3-P15C - Melt High Temperature

Accuracy (1) H <±0.25%FSO (100...1000 bar)
M <±0.5%FSO (35...1000 bar)
Resolution Infinite
Measurement range 0..35 a 0..1000bar
0..500 a 0..15000psi
Maximum overpressure 2 x FSO
1.5 x FSO over 700bar/10000psi
Measurement principle Strain gauge
Power supply 6..12Vdc (10Vdc typical)
Bridge resistance
350 Ohm
(550 Ohm below
100bar - 1500psi)
Insulation resistance
(at 50Vdc) >1000 MOhm
Output signal Full Scale FSO
(tolerance ± 0;5% FSO)
2.5 mV/V (option 2)
3.33 mV/V (option 3)
Zero balance ±5%
Calibration signal 80% FSO
Compensated temperature
range
0...+100°C
32...212°F
Maximum temperature range -30...+120°C
-22...250°F
Thermal drift in compesated
range: Zero / Calibration /
Sensibility
< 0.02% FSO/°C
< 0.01% FSO/°F
Diaphragm maximum
temperature
538°C
1000°F
Zero drift due to change in
process temperature)
 < 3,5 bar/100°C
< 28 psi/100°F
Thermocouple (model K32) STD : type “J”
(isolated junction)
Protection degree
(with 6-pole female connector) IP65
Electrical connections
Conn. 6-pin VPT07RA10-6PT
(PT02A-10-6P)
Conn.8-pin PC02E-12-8P