Marka	Gefran
Ürün	Melt High Temperature
Ürün Kodu	KE SIL2-P75D
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Accuracy (1) H <±0.25%FS (100...1000 bar) M <±0.5%FS (17...1000 bar) Resolution Infinite Measurement range 0..17 a 0..1000bar 0..250 a 0..15000psi Maximum overpressure (without degrading performances) 2 x FS 1.5 x FS over 700bar/10000psi Measurement principle Extensimetric thick film Power supply 10..30Vdc Maximum current absorption 32mA Insulation resistance (at 50Vdc) >1000 MOhm Output signal Full Scale FS 20mA Zero balance (tolerance ± 0.25% FS) 4mA Zero signals adjustment (tolerance ± 0.25% FS) “Autozero” function Span adjustment within ± 5% FS See Melt Manual Maximum allowed load See chart Electronic response time (10...90% FS) ~ 1ms Output noise (RMS 10-400Hz) < 0.025% FS Calibration signal 80% FS Output short circuit and reverse polarity protection YES Compensated temperature range 0...+85°C Operating temperature range -30...+105°C Storage temperature range -40...+125°C Thermal drift in compesated range: Zero / Calibration / Sensibility < 0.02% FS/°C Diaphragm maximum temperature 538°C 1000°F Zero drift (zero) < 3,5bar/100°C / < 28 psi/100°F Zero drift temperature for Autocompensated version (SP) within the temperature range 20°C-500°C inclusive the drift temperature of the housing < 0.005 bar/°C 100 ≤ p < 500 bar 0.0022 %FS/°C p ≥ 500 bar Thermocouple (model KE2) STD : tipo “J” (isolated junction) Protection degree (with 6-pole female connector CON300) IP66 SIL2 certification IEC/EN 62061  IEC 61508