Marka	Gefran
Ürün	Melt High Temperature
Ürün Kodu	M7 SIL2-P25D
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Accuracy (1) H <±0.25%FS (100...2000 bar) M <±0.5%FS (17...2000 bar) Resolution Infinite Measurement range 0..17 a 0..2000bar 0..250 a 0..30000psi Maximum overpressure (without degrading performances) 2 x FS 1.5 x FS above 1000bar/15000psi Measurement principle Extensimetric thick film Power supply 10...30Vdc (B) 15...30 Vdc (C,7) Maximum current absorption 25mA Insulation resistance (at 50Vdc) >1000 MOhm Output signal Full Scale FS 10.5 Vdc (7) – 5.1Vdc (B) 10.1Vdc (C) Zero balance (tolerance ± 0.25% FS) 0.5 Vdc (7) - 0.1Vdc (B, C) Zero signals adjustment (tolerance ± 0.25% FS) “Autozero” function Span adjustment within ± 5% FS See Melt Manual Maximum allowed load 1mA Electronic response time (10...90% FS) ~ 1ms Output noise (RMS 10-400Hz) < 0.025% FS Calibration signal 80% FS Output short circuit and reverse polarity protection YES Compensated temperature range 0...+85°C Operating temperature range -30...+105°C Storage temperature range -40...+125°C Thermal drift in compesated range: Zero / Calibration / Sensibility < 0.02% FS/°C Diaphragm maximum temperature 400°C / 750°F Zero drift due to change in process temperature (zero) 0.02 bar/°C Zero drift temperature for Autocompensated version (SP) within the temperature range 20°C-400°C inclusive the drift temperature of the housing < 0.003 bar/°C 100 ≤ p < 500 bar 0.0014 %FS/°C p ≥ 500 bar Standard material in contact with process medium Diaphragm: • 15-5 PH with GTP+ coating • 17-7 PH corrugated diaphragm  with GTP+ coating for ranges  <100 bar(1500psi) Stem: • 17-4 PH Thermocouple (model M72) STD: type “J” (isolated junction) Protection degree (with 6-pole female connector CON300) IP66 SIL2 certification IEC/EN 62061  IEC 61508