Gefran MD-P20M - Melt High Temperature

Accuracy (1)
Resolution
Measurement range
Maximum overpressure
(without degrading performances)
Measurement principle
Power supply
Maximum current absorption
Insulation resistance (at 50Vdc)
Output signal Full Scale (FSO)
Zero balance
(tollerance ± 0.25% FSO)
Zero signals adjustment
(tollerance ± 0.25% FSO)
Span adjustment within ± 5% FSO
Maximum allowed load
Response time (10...90% FSO)
Output noise (RMS 10-400Hz)
Calibration signal
Output short circuit ingress and reverse
polarity protection
Compensed temperature range
Operating temperature range
Storage temperature range
Thermal drift in compesated range:
Zero / Calibration / Sensibility
Diaphragm maximum temperature
Zero drift due to change in process
temperature (zero)
Zero drift temperature for Autocompensated version (SP) within the
temperature range 20°C-315°C inclusive
the drift temperature of the housing
Standard Material in contact
with process medium
Thermocouple (model WN2)
Protection degree
(with 6-pole female connector)
 H <±0.25%FSO (100...1000 bar)
 M <±0.5%FSO (35...1000 bar)
 Infinite
 0..35 to 0..1000bar
0..500 to 0..15000psi
2 x FS
1.5 x FS above 500bar/7500psi
Extensimetric
15...30Vdc N, C
10...30Vdc B, M
-15....+15Vdc H, L
25mA
>1000 MOhm
5Vdc (M, H) - 10Vdc (N, L)
5,1Vdc (B) - 10,1Vdc (C)
0Vdc (M, N, H, L)
0.1Vdc (B, C)
“Autozero” function
See Manual
1mA
~ 1ms
< 0.025% FSO
80% FSO
YES
0...+85°C
-30...+105°C
 -40...+125°C
< 0.02% FSO/°C
 315°C/600°F
< 0.04 bar/°C
< 0.005 bar/°C 100 ≤ p < 500 bar
0.0022 %FS/°C p ≥ 500 bar
Diaphragm: • 17-7PH corrugated
 diaphragm with GTP+
Stem • 17-4 PH
STD: type “J” (isolated junction)
IP65