Marka	Gefran
Ürün	Melt High Temperature
Ürün Kodu	WE SIL2-B07C
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Accuracy (1) H <±0.25%FS (100...1000 bar) M <±0.5%FS (17...1000 bar) Resolution Infinite Measurement range 0..17 to 0..1000bar 0..250 to 0..15000psi Maximum overpressure (without degrading performances) 2 x FS 1.5 x FS above 500bar/7500psi Measurement principle Extensimetric thick film Power supply 10...30Vdc Maximum current absorption 32mA Insulation resistance (at 50Vdc) >1000 MOhm Output signal Full Scale (FS) 20mA Zero balance (tollerance ± 0.25% FS) 4mA Zero signals adjustment (tollerance ± 0.25% FS) “Autozero” function Span adjustment within ± 5% FS See Manual Maximum allowed load See diagram Response time (10...90% FS) ~ 1ms Output noise (RMS 10-400Hz) < 0.025% FS Calibration signal 80% FS Output short circuit ingress and reverse polarity protection YES Compensed temperature range 0...+85°C Operating temperature range -30...+105°C Storage temperature range -40...+125°C Thermal drift in compesated range: Zero / Calibration / Sensibility < 0.02% FS/°C Diaphragm maximum temperature 315°C / 600°F Zero drift due to change in process temperature (zero) < 0.04 bar/°C Zero drift temperature for Autocompensated version (SP) within the temperature range 20°C-315°C inclusive the drift temperature of the housing < 0.005 bar/°C 100 ≤ p < 500 bar 0.0022 %FS/°C p ≥ 500 bar Standard material in contact with process medium Diaphragm: • 17-7PH corrugated diaphragm  with GTP+ Stem • 17-4 PH Thermocouple (model WE2) STD: type “J” (isolated junction) Protection degree (with 6-pole female connector CON300) IP66 SIL2 certification IEC/EN 62061  IEC 61508