Greisinger Optical Oxygen Transmitter For Universal Applications, Stainless Steel

GODOX-200-ST

Greisinger

Marka Greisinger
Ürün Optical Oxygen Transmitter For Universal Applications, Stainless Steel
Ürün Kodu GODOX-200-ST
Artikel -
Ülke United States (US)
Durumu Yeni / Kullanılmamış

Teknik Bilgi


Optical oxygen transmitter for universal applications, stainless steel

 

HIGHLIGHTS: • Two 4 ... 20 mA (or 0 ... 5 V) outputs: concentration and saturation • Full pressure and temperature compensated • Calibration in many applications only once a year! • No inflow required

GENERAL: The oxygen measuring transducer GODOX 200 is a robust measuring system for low-maintenance continuous use. Compared to electrochemical sensors, it does not require an electrolyte and is measured using a fluorescence transit time method. Together with the complete data processing, including automatic ambient pressure and temperature compensation, it represents a carefree package for long-term measurements. Measurements at a depth of up to 30 m are possible. The service life of the replaceable measuring membrane is usually 2 years.

TECHNICAL SPECIFICATIONS:

Measuring ranges (both can be used simultaneously) Oxygen concentration: 0 ... 20 mg/l (=ppm) Oxygen saturation: 0 ... 200% O2 Output signal: 4 ... 20 mA or 0 ... 5 each V (adjustable) Accuracy: ±0.1 mg/l below 1 mg/l, ±0.2 mg/l above 1 mg/l Response time T90: < 30 s Operating temperature: 0 ... 65 ºC Supply: 5 .. 15 V DC , approx _ _ _ _ _ _ Installation diameter: 28.0 mm Process connection: 1” NPT front/rear (others on request) Connection: Flying leads: No. Color Description 1 red supply + 2 black supply - 3 green output O2 concentration 4 white output O2 saturation Cable length: 5 m more Cable lengths on request.  Scope of delivery: Transmitter (consisting of sensor body and evaluation electronics, connected with cable), storage cap

Orijinal Ürünler
Çoklu Lojistik Seçeneği
Dünyanın Her Yerine Tedarik
Uzman Ekip Kadrosuyla
Bize 7/24 E-Posta gönderebilir veya Canlı Destekten Sorularınızı Sorabilirsiniz.

İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.

info@fabrikaparca.com

Türkiye' nin Her Yerinden44448 19
İzmir
Bursa
İstanbul
Adana

ÇALIŞMA SAATLERİ

Pazartesi - Cuma

08:00 - 18:00

Hafta sonu kapalı.

Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.