Greisinger GTMU-MP-AP1 - Temperature Transmitter

Temperature transmitter, G = ½", FL = 100 mm, D = 6 mm

GENERAL:

Temperature transmitter (application range from -50..+400 °C) for:

• almost all applications
• Output signals freely scalable
• On-site temperature display
• Readjustment by user possible

TECHNICAL SPECIFICATIONS:

Measuring range:
-50.0..+400.0 °C, freely scalable (The sensor length must be selected so
that the maximum permissible operating temperature of the electronics and the housing of 70 °C is not exceeded!)
Accuracy:
(at 25 ° C)
Temperature display:
±0.4% of the measured value ±0.2 °C
Output signal:
±0.2% FS (compared to the display)
Sensor:
Pt1000, 2-wire, DIN class B
Output signal: 4..20 mA ( 2-wire), freely scalable
Display:
approx. 10 mm high, 4-digit LCD display
Relative humidity (electronics):
0..95% RH (non-condensing); If there is a risk of condensation due to
temperature changes, the "LACK" option is recommended.
Construction:
plastic radiation hat, Ø 110 mm, height approx. 140 mm. Wall bracket made of stainless steel with 3 fixing holes diameter 5 mm. Largest projection 160 mm.
Housing:
ABS (IP65)
Sensor tube:
stainless steel
Electrical connection:
angle plug according to EN 175301-803/A (IP65)
Fastening:
4 housing bores for wall mounting or via
plastic tube holder for duct mounting
Functions:
zero point/slope digitally adjustable, output signal freely scalable (without Aids)
Scope of delivery:
device, operating instructions