Greisinger Temperature Transmitter

GTMU-MP-AP3

Greisinger

Marka Greisinger
Ürün Temperature Transmitter
Ürün Kodu GTMU-MP-AP3
Artikel -
Ülke United States (US)
Durumu Yeni / Kullanılmamış

Teknik Bilgi


Temperature transmitter, room or outdoor sensor for direct wall mounting, FL = 50 mm, D = 3 mm

 

GENERAL:

Temperature transmitter (application range from -50..+400 °C) for:

  • almost all applications
  • Output signals freely scalable
  • On-site temperature display
  • Readjustment by user possible

TECHNICAL SPECIFICATIONS:

Measuring range: -50.0..+400.0 °C, freely scalable (The sensor length must be selected so that the maximum permissible operating temperature of the electronics and the housing of 70 °C is not exceeded!) Accuracy: (at 25 ° C) Temperature display: ±0.4% of the measured value ±0.2 °C Output signal: ±0.2% FS (compared to the display) Sensor: Pt1000, 2-wire, DIN class B Output signal: 4..20 mA ( 2-wire), freely scalable Display: approx. 10 mm high, 4-digit LCD display Relative humidity (electronics): 0..95% RH (non-condensing); If there is a risk of condensation due to temperature changes, the "LACK" option is recommended. Construction: plastic radiation hat, Ø 110 mm, height approx. 140 mm. Wall bracket made of stainless steel with 3 fixing holes diameter 5 mm. Largest projection 160 mm. Housing: ABS (IP65) Sensor tube: stainless steel Electrical connection: angle plug according to EN 175301-803/A (IP65) Fastening: 4 housing bores for wall mounting or via plastic tube holder for duct mounting Functions: zero point/slope digitally adjustable, output signal freely scalable (without Aids) Scope of delivery: device, operating instructions

Orijinal Ürünler
Çoklu Lojistik Seçeneği
Dünyanın Her Yerine Tedarik
Uzman Ekip Kadrosuyla
Bize 7/24 E-Posta gönderebilir veya Canlı Destekten Sorularınızı Sorabilirsiniz.

İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.

info@fabrikaparca.com

Türkiye' nin Her Yerinden44448 19
İzmir
Bursa
İstanbul
Adana

ÇALIŞMA SAATLERİ

Pazartesi - Cuma

08:00 - 18:00

Hafta sonu kapalı.

Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.