Greisinger GTMU-IF1 - Temperature Transmitter In Stainless Steel Housing

Temperature transmitter in stainless steel housing, without thread

GENERAL:

Microcontroller transmitter with high accuracy in a compact design.

TECHNICAL SPECIFICATIONS:

Measuring range: The length of the sensor should be selected so that the maximum permissible
working temperature of the electronics in the cable sleeve
is not exceeded.
GTMU-IF1 (default): -30.0..+100.0 °C
GTMU-IF2 (default): -30.0..+100.0 °C
GTMU-IF3 (default): -70.0. .+400.0 °C
Other measuring ranges (max. -200..+500 °C) on request
Sensor: internal Pt1000 sensor, DIN class B
Accuracy: (at nominal temperature = 25 °C)
Electronics: ±0.2 % of measured value ±0.2 °C
Sensor: Standard: DIN Kl. B
Optionally higher sensor accuracy possible
Output signal: 4..20 mA (2-wire)
Auxiliary energy: Uv = 10..30 V DC
Permissible burden: RA ≤ (UV - 10 V ) / 0.022 A [RA in ohms, UV in V]
Operating temperature of
electronics (in cable sleeve):
-25..+60 °C
Protection class: M12 IP67/69K, cable: IP67/IP69
Housing: stainless steel housing
Dimensions: dependent on sensor construction
Cable sleeve: Ø 15 x 35 mm (without screw connection)
Electrical Connection: approx. 1 m long 4-pin cable
(2 x current loop, 2 x interface)