Cemb Tr 26 Vibration Transmitter

TR-26

Cemb

Marka Cemb
Ürün Vibration Transmitter
Ürün Kodu TR-26
Artikel -
Ülke United States (US)
Durumu Yeni / Kullanılmamış

Teknik Bilgi


4-20mA Absolute vibration transmitter IP65 SS316 body with onboard 2 pin connector for machinery online monitoring

The integrated vibration transmitter TR-26 measures the absolute vibrations of any rotating machine support

The transmitter, secured directly on machinery, generates an electric signal (4÷20 mA) which is proportional respectively to vibration velocity or acceleration.

The transmitter is made of an AISI 316L body with machine connection thread; the connection to the acquisition system is effected by means of a MIL-C-5015-2 poles connector.

NOTE: The transmitter is available in different configuration versions and does not need any set-up or maintenance.

TR-26 monitors vibration of the point where fixed and interfaces directly to PLC/DCS 2 wires current loop. It is available with different certifications:

  • Intrinsecally safe Atex,
  • TP TC, IECEx.
  • CSA/UL HazLoc

The transmitter is certificate SIL 2 for functional safety

CompositionAISI 316L stainless steel body
Power supply24 Vdc (10 ÷ 35 Vdc) current loop 4 ÷ 20 mA (2 wires)
External connectionsMIL-C-5015 2 poles connector (conductors max section 2,5 mm²)
4 poles M12 connector
Environmental- 60°C ÷ + 120°C
IP 65 EN 60529/10.91 standards
Measure typeOmnidirectional seismic (absolute vibration)
Dynamic field± 18 g
Transverse sensitivity< 5 %
Linearity± 2% - 75 Hz
Dynamic performances±3% / 10Hz – 1kHz - see Figure 2
-3db / 1.5Hz – 2.5kHz
Insulation?108 ? between signal and container
Application axisAny
Standard machine connection threadM8x1,25
¼”-18NPT
¼’’-28UNF
M6x1
MaintenanceNo maintenance is needed
Electrical connectionsBipolar shielded cable, conductors typical section 2x1mm²
Parameters to be defined when orderingMeasuring field - Machine connection thread - Certification - Connection
Mounting torque5÷10 N-m
Certification availableEx II 2 G Ex ia IIC T6, T5, T4 Gb (ATEX) - Ex ia IIC T6, T5, T4 Gb (IECEx)

Orijinal Ürünler
Çoklu Lojistik Seçeneği
Dünyanın Her Yerine Tedarik
Uzman Ekip Kadrosuyla
Bize 7/24 E-Posta gönderebilir veya Canlı Destekten Sorularınızı Sorabilirsiniz.

İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.

info@fabrikaparca.com

Türkiye' nin Her Yerinden44448 19
İzmir
Bursa
İstanbul
Adana

ÇALIŞMA SAATLERİ

Pazartesi - Cuma

08:00 - 18:00

Hafta sonu kapalı.

Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.