Marka	Honsberg
Ürün	Flow Switch
Ürün Kodu	HRVE-032GM
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Sensor analog Hall sensors Nominal width DN 32 / 40 / 50 Process connection female thread G 1 1 /4..G 2 (further process connections available on request) Metering range 10..160 l/min for details see table "Ranges" Pressure loss ~ 4..7 bar at Qmax Qmax. up to 160 l/min Measurement accuracy ±5 % of full scale value at constant viscosity Viscositystability ±10 % of full scale value (30-330 mm²/s) Pressure resistance PS 200 bar Medium temperature -20..+85 °C, optionally -20..+120 °C Ambient temperature -20..+70 °C Media oil Wiring see section "Wiring" Materials medium-contact Brass construction: CW614N nickelled, CW614N, 1.4305, 1.4310, hard ferrite Stainless steel construction: 1.4571, 1.4310, hard ferrite Non-mediumcontact materials CW614N nickelled Supply voltage 18..30 V DC Power consumption < 1 W Switching output transistor output "Push-Pull" (resistant to short circuits and reversed polarity protected) lout = 100 mA max. Electrical connection for round plug connector M12x1, 4-pole Display yellow LED (On = Normal / Off = Alarm / rapid flashing = Programming) Ingress protection IP 67 Weight see table "Dimensions and weights" Conformity CE Installation location Standard: horizontal inwards flow; other installation positions are possible; the installation position affects the metering and switching range.