Marka	Honsberg
Ürün	Flow Switch
Ürün Kodu	LABO-RRH-010...020
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Sensor hall element Nominal width DN 10 (LABO-RRH-010) DN 25 (LABO-RRH-025) Mechanical Connection female thread G 3 /8, G 1 male thread G 3 /8 A, G 1 A hose nozzle Ø11, Ø30 (other threaded, crimped, and plug-in connections, connections with constant flow rate device or limiters available on request) Switching ranges 0.1..100 l/min for details, see table "Ranges" Measurement accuracy ±3 % of the measured value Repeatability ±1 % of full scale value Pressure loss max. 0.5 bar Pressure resistance PN 100 bar Medium temperature 0..60 °C, optionally 0..100 °C Storage temperature -20..+80 °C Materials medium-contact Housing CW614N nickelled or 1.4305 Rotor PVDF with magnets, glued with epoxy resin Bearing Iglidur X Axis Ceramic Zr02-TZP Seal FKM Materials, nonmedium-contact Clamps 1.4301 Electronic housing CW614N nickelled Supply voltage 10..30 V DC at voltage output 10 V: 15..30 V DC Power consumption < 1 W (for no-load outputs) Switching output transistor output "push-pull" (resistant to short circuits and polarity reversal) lout = 100 mA max. Display yellow LED (On = Normal / Off = Alarm / rapid flashing = Programming) Electrical connection for round plug connector M12x1, 4-pole Ingress protection IP 67 Weight LABO-RRH-010 approx. 0.6 kg LABO-RRH-025 approx. 1.9 kg Conformity CE