Marka	Honsberg
Ürün	Flow Transmitter
Ürün Kodu	HR2VE-032GM
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Sensor analog hall sensor Nominal size DN 32 / 40 / 50 Connection type internal thread G 1 1 /4..G 2 (other connection types on request) Measuring range 10..160 l/min See details "Ranges" table Pressure loss ~ 4..7 bar at Qmax Qmax. up to 160 l/min Measurement uncertainty ±5% of final value at constant viscosity viscosity stability ±10% of full scale (30-330 mm²/s) Pressure resistance PS 200 bar Media temperature -20..+85 °C optionally -20..+120 °C ambient temperature -20..+70 °C media oil Connection diagram see chapter "Connection diagram" materials media-affected Brass finish: CW614N nickel-plated, CW614N, 1.4305, 1.4310, hard ferrite, Stainless steel version: 1.4571, 1.4310, hard ferrite materials do not media-affected Electronics adapter CW614N nickel-plated Electronics housing stainless steel 1.4305 Supply 18..30 V DC power consumption < 1w Analog output 4..20 mA / load max. 500 Ω or 0..10 V / load min. 1 kΩ Switching output Transistor output "Push-Pull" (short-circuit and reverse polarity protection) Iout = 100mA max. Adjustable hysteresis, position of the hysteresis from min. or max dependent Pulse output Pulse width 50 ms → max. output frequency < 20 Hz Ad (only with switching output) Yellow LED (On = OK / Off = Alarm) Electrical connection for circular connector M12x1, 5-pin Degree of protection IP 67 Weight see table "Dimensions and weights" Conformity CE Standard installation position: horizontal inflow; other Installation positions are possible; the installation position has an impact on the display, measurement and switching range.