Honsberg HR2VE-040GM - Flow Transmitter

Sensor analog hall sensor
Nominal size DN 32 / 40 / 50
Connection type internal thread G 1
1
/4..G 2
(other connection types on request)
Measuring range 10..160 l/min
See details
"Ranges" table Pressure loss ~ 4..7 bar at Qmax
Qmax. up to 160 l/min
Measurement uncertainty ±5% of final value at constant viscosity
viscosity stability
±10% of full scale
(30-330 mm²/s)
Pressure resistance PS 200 bar
Media temperature -20..+85 °C optionally -20..+120 °C
ambient temperature
-20..+70 °C
media oil
Connection diagram see chapter "Connection diagram"
materials
media-affected
Brass finish:
CW614N nickel-plated,
CW614N,
1.4305, 1.4310,
hard ferrite,
Stainless steel version:
1.4571, 1.4310,
hard ferrite
materials do not
media-affected
Electronics adapter CW614N nickel-plated
Electronics housing stainless steel 1.4305
Supply 18..30 V DC
power consumption
< 1w
Analog output 4..20 mA / load max. 500 Ω or
0..10 V / load min. 1 kΩ
Switching output Transistor output "Push-Pull"
(short-circuit and reverse polarity protection)
Iout = 100mA max.
Adjustable hysteresis, position of the hysteresis from min.
or max dependent
Pulse output Pulse width 50 ms
→ max. output frequency < 20 Hz
Ad (only with
switching output)
Yellow LED (On = OK / Off = Alarm)
Electrical connection for circular connector M12x1, 5-pin
Degree of protection IP 67
Weight see table "Dimensions and weights"
Conformity CE
Standard installation position: horizontal inflow; other
Installation positions are possible; the installation position
has an impact on the display, measurement and
switching range.