Marka	Honsberg
Ürün	Flow Transmitter
Ürün Kodu	LABO-F012- F
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Sensor calorimetric measurement principle Process connection push-in sensor Ø12 mm Metering range water 2..150 cm/s or 3..300 cm/s oil or gases available on request Measurement accuracy depending on the installation location and flow conditions typically ±10 % of full scale value or 2 cm/s, of full scale value measured in the T-piece ±5 % Repeatability ±1 % Pressure resistance stainless steel compression fitting PN 40 bar plastic cone with union nut PN 10 bar Medium temperature -20..+70 °C -20..+100 °C ( extended temperature range) Ambient temperature 0..+60 °C Temperature dependency ±0.01 % / K Supply voltage 24 V DC ±10 % (controlled) Power consumption < 2 W Analog output 4..20 mA / load max. 500 Ohm or 0..10 V / min. load 1 kOhm Frequency output selectable, max. 2 kHz. Pulse output selectable pulse per volume, details of Nominal pipework width required, pulse width 50 ms LED yellow LED (On = Normal / Off = Alarm / rapid flashing = Programming) Electrical connection for round plug connector M12x1, 4-pole Ingress protection IP 67 Materials medium-contact Housing 1.4571 Materials nonmedium-contact Plug PA6.6 gold-plated contacts Weight approx. 0.05 kg (excluding screwed connection) Conformity CE