Marka	Honsberg
Ürün	Flow Transmitter
Ürün Kodu	LABO-HR2VE-I / U / F / C
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Sensor analog Hall sensors Nominal width DN 32 / 40 / 50 Process connection female thread G 1 1 /4..G 2 (further process connections available on request) Metering range 10..160 l/min For details see table "Ranges" Pressure loss ~ 4..7 bar at Qmax Qmax. up to 160 l/min Tolerance ±10 % of full scale value at constant viscosity Viscositystability mean deviation ±7 %, max. 18 % (30-330 mm²/s) of full scale value Pressure resistance PS 200 bar Medium temperature -20..+85 °C, optionally -20..+120 °C Ambient temperature -20..+70 °C Media oil Wiring see section "Wiring" Materials medium-contact Brass construction: CW614N nickelled, CW614N, 1.4305, 1.4310, hard ferrite Stainless steel construction: 1.4571, 1.4310, hard ferrite Non-mediumcontact materials CW614N nickelled Power supply 18..30 V DC Power consumption < 1 W Outputs LABO-....I: Current output 4..20 mA (alternatively 0..20 mA) Max. load 500 Ohm LABO-....U: Voltage output 0..10 V (alternatively 2..10 V)  Load min. 1 kOhm LABO-....F: Frequency output Transistor output "Push-Pull" (resistant to short circuits, and reversed polarity protected) lout = 100 mA max. Selectable frequency, max. 2 kHz LABO-....C: Transistor output "Push-Pull" lout = 100 mA max. Pulse width 50 ms Pulse/Value is to be specified when ordering Electrical connection for round plug connector M12x1, 4-pole Display yellow LED (On = Normal / Off = Alarm / rapid flashing = Programming) Ingress protection IP 67 Weight see table "Dimensions and weights" Conformity CE Installation location Standard: horizontal inwards flow; other installation positions are possible; the installation position affects the metering and switching range.