Marka	Honsberg
Ürün	Flow Transmitter
Ürün Kodu	LABO-RRI-025...120
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Sensor inductive Nominal width DN 10 (FLEX-RRI-010) DN 25 (FLEX-RRI-025) Mechanical Connection female thread G 3 /8, G 1 male thread G 3 /8 A, G 1 A hose nozzle Ø11, Ø30 (other threaded, crimped, and plug-in connections, connections with constant flow rate device or limiters available on request) Metering ranges 0.1..100 l/min for details, see table "Ranges" Measurement accuracy ±3 % of the measured value Repeatability ±1 % of full scale value Pressure loss max. 0.5 bar Pressure resistance PN 16 bar Medium temperature 0..60 °C Storage temperature -20..+80 °C Materials medium-contact Housing PPS (Fortron 1140L4) Rotor PVDF Clamps 1.4310 optionally: titanium or Hastelloy® Bearing Iglidur X Axis Ceramic Zr02-TZP Seal FKM Materials, nonmedium-contact Clamps 1.4301 Electronic housing CW614N nickelled Supply voltage 10..30 V DC at voltage output 10 V: 15..30 V DC Power consumption < 1 W (for no-load outputs) Output data: all outputs are resistant to short circuits and reversal polarity protected Current output: 4..20 mA (0..20 mA available on request) Voltage output: 0..10 V (2..10 V available on request) Output current max. 20 mA Frequency output: transistor output "push-pull" lout = 100 mA max. output frequency dependent on metering range, standard 500 Imp/l (corresponds to 666.7 Hz at 80 l/min) Rrange for small values: 5000 Imp/l (corresponds to 500 Hz at 6 l/min) (other frequencies available on request) Pulse output: transistor output "push-pull" lout = 100 mA max. pulse width 50 ms pulse per volume is to be stated Display yellow LCD shows operating voltage (LABO-RRI-I / U) or output status (LABO-RRI-F / C) (rapid flashing = Programming) Electrical connection for round plug connector M12x1, 4-pole Ingress protection IP 67 Weight LABO-RRI-010 approx. 0.2 kg LABO-RRI-025 approx. 0.5 kg Conformity CE