Marka	Honsberg
Ürün	Flow Transmitter
Ürün Kodu	OMNIPLUS-RRH-025A
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Measuring principle Magnet-equipped paddle wheel Detection with Hall sensor Nominal size DN 10 (OMNIPLUS-RRH-010) DN 25 (OMNIPLUS-RRH-025) Connection type Female thread G 3 /8, G 1 Male thread G 3 /8 A, G 1 A Hose nozzle Ø11, Ø30 (other threads, crimp and plug-in connections, connections with constants or limiters on request) Ranges 0.1…100 l/min (see table „Ranges“) Measurement uncertainty ±3 % of reading Media Water or other low-viscosity liquids Pressure loss max. 0.5 bar Compressive strength PN 100 Media temperature 0...+70 °C Storage temperature -20...+80 °C Materials wetted with media Housing CW614N nickel-plated or 1.4305 Rotor PVDF with magnets, epoxy resin Bearings Iglidur X Axle ceramics Zr02-TZP Gaskets FKM optional: NBR, EPDM Supply voltage 18...30 V DC Current consumption < 130 mA (SIO mode, unloaded outputs) IO-Link specification IO-Link revision Bit rate Minimum cycle time SIO mode Port class Block parameterization Data storage V1.1 COM2 (38400 bit/s) 20 ms yes A compatible yes yes Analog output Current: 4...20 mA 0...20 mA Voltage: 0...10 V 2...10 V 0...5 V 1...5 V 0.5...4.5 V Switching outputs 2 transistor outputs push-pull, parameterizable as NPN o.C. Short-circuit and reverse polarity resistant Iout = 100 mA max per output Configurable on the device as ● Limit switch ● Frequency output ● Pulse output ● Signal output for preset counter Display 1.2" graphic LCD (transflective) 128 x 64 pixels backlight white, red on alarm message Electr. connection M12x1 circular connector, 5-pin Protection class IP65 / IP67 Conformity CE