Honsberg OMNIPLUS-RT-020AK004 - Flow Transmitter

Measuring
principle
Turbine flow meter with biased Hall sensor
Nominal size DN15...DN50
Ranges 1.8...1133 l/min
see table "Ranges and dimensions"
Measurement
uncertainty
±1 % of the final value in the specified
measuring range including linearity and
repeatability
Media Wasser oder andere niedrigviskose Flüssigkeiten
Particle size max. 0.5 mm
Pressure loss Max. 0.9 bar at Qmax
Compressive
strength
PN 250
Media temperature -20...+85 °C
Ambient temp. -20...+70 °C
Storage
temperature
-20...+80 °C
Materials
wetted with media
Housing AISI 316
Turbine AISI 430
Bearing Tungsten carbide
Supply voltage 18...30 V DC
Current
consumption
< 130 mA
(SIO mode, unloaded outputs)
IO-Link
specification
IO-Link revision
Bit rate
Minimum cycle time
SIO mode
Port class
Block parameterization
Data storage
V1.1
COM2 (38400 bit/s)
20 ms
yes
A compatible
yes
yes
Analog output Current: 4...20 mA
0...20 mA
Voltage: 0...10 V
2...10 V
0...5 V
1...5 V
0.5...4.5 V
Switching outputs 2 transistor outputs push-pull,
parameterizable as NPN o.C.
Short-circuit and reverse polarity resistant
Iout = 100 mA max per output
Configurable on the device as
● Limit switch
● Frequency output
● Pulse output
● Signal output for preset counter
Display 1.2" graphic LCD (transflective)
128 x 64 pixels
backlight white,
red on alarm message
Electr. connection M12x1 circular connector, 5-pin
Protection class IP65 / IP67
Conformity CE