Marka	Honsberg
Ürün	Flow Transmitter / Switch
Ürün Kodu	FLEX-F
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Sensor calorimetric measurement principle Process connection screw-in thread G 1 /4 A..G 1 /2A, Push-in sensor Ø12 mm Metering range water 2..150 cm/s or 3..300 cm/s oil available on request Measurement accuracy depending on the installation location and flow conditions typically ±10 % of full scale value or min. ± 2 cm/s, measured in the GHM measuring tube ±5 % of full scale value (only for 12 mm version) Repeatability ±1 % Operating pressure PN 100 bar, 200 bar available on request Metering range Temperature 0..+70 °C (high temperature model 0..+120 °C with gooseneck) Operating temperature 0..+70 °C Storage temperature -20..+80 °C Temperature gradient 4 Kelvin/s Materials medium-contact Sensor 1.4571 Materials, nonmedium-contact Housing 1.4305 Plug PA6.6 Clip PA6.6 Adjustment by means of magnet Supply voltage 24 V DC ±10 % Current requirement max. 100 mA Switching output transistor output "push-pull" (resistant to short circuits and polarity reversal) Iout = 100 mA max. Switching hysteresis flow 4 % of full scale value, temp.: approx. 2 °C Display yellow LED (On = Normal / Off = Alarm / rapid flashing = Programming) Analog output 4..20 mA / Load 500 Ohm max. or 0..10 V Electrical connection for round plug connector M12x1, 4-pole Weight approx. 0.2 kos (standard version) Ingress protection IP 67 Conformity CE