Marka	Honsberg
Ürün	Flow Transmitter / Switch
Ürün Kodu	HR2VE-032GM
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Sensor analog Hall sensor Nominal width DN 32 / 40 / 50 Process connection female thread G 1 1 /4..G 2 (further process connections available on request) Metering range 10..160 l/min for details see table "Ranges" Pressure loss ~ 4..7 bar at Qmax Qmax. up to 160 l/min Measurement accuracy ±5 % of full scale value at constant viscosity Viscositystability ±10 % of full scale value (30-330 mm²/s) Pressure resistance PS 200 bar Medium temperature -20..+85 °C, optionally -20..+100 °C Ambient temperature -20..+70 °C Media oil Wiring see section "Wiring" Materials medium-contact Brass construction: CW614N nickelled, CW614N, 1.4305, 1.4310, hard ferrite, Stainless steel construction: 1.4571, 1.4310, hard ferrite Materials, nonmedium-contact Electronic adapter CW614N nickelled Electronics housing Stainless steel 1.4305 Glass Mineral glass, hardened Magnet Samarium-Cobalt Ring POM Supply voltage 18..30 V DC Power consumption <1 W Analog output 4..20 mA / max. load 500 Ω or 0..10 V / min. load 1 kΩ Switching output Transistor output "Push-Pull" (resistant to short circuits and polarity reversal) Iout = 100 mA max. Hysteresis adjustable, position of the hysteresis depends on minimum or maximum Display extendable graphic LCD display Temperature range -20..+70 °C, 32 x 16 pixels, background illumination, displays value and unit, flashing LED signal lamp with simultaneous message on the display Electrical connection for round plug connector M12x1, 5-pole Ingress protection IP 67 (IP 68 when oil-filled) Weight see table "Dimensions and weights" Conformity CE Installation location Standard: horizontal inwards flow; other installation positions are possible; the installation position affects the display, metering and switching range.