Honsberg OMNI-FIS - Flow Transmitter / Switch

Sensor magnetic-inductive
Nominal width DN 50..300 welded-on nozzle
DN 50..150 tapping sleeve
Process
connection
welded-on nozzle, tapping sleeve
Metering ranges full scales 1..8 m/s in steps of 1 m/s
Measurement
accuracy
±5 % of the measured value, (when
calibrated on the spot ±2 % of the measured
value), from 3 cm/s
Repeatability ±2 % of the measured value
Time constant 5 seconds fixed
Media conductive, largely homogeneous fluids,
pastes, and slurries,
also having solids components
Electrical
conductivity
min. 20 mS/cm
Medium
temperature
-25..+150 °C
Ambient
temperature
-25..+60 °C
Pressure
resistance
max. 25 bar, welded-on nozzle
max. 10 bar, tapping sleeve
Materials Probe stainless steel 1.4435
Insulation ceramic
(zirconium oxide)
Tapping sleeve PP, 1.4305
Electronics housing stainless steel 1.4305
FKM and Klingerit
Materials
non-mediumcontact
Electronics housing stainless steel 1.4305
Glass mineral glass
hardened
Magnet samarium-Cobalt
Ring POM
Supply voltage 18..30 V DC
Power
consumption
< 2 W
Analog output 4..20 mA / max. load 500 Ω or
0..10 V / min. load 1 kΩ
Switching outputs transistor output "push-pull"
(resistant to short circuits and polarity
reversal)
Iout = 100 mA max.
Hysteresis adjustable, position of the hysteresis
depends on minimum or maximum
Display backlit graphical LCD-Display
(transreflective), extended temperature
range -20..+70 °C, 32 x 16 pixels,
background illumination, displays value and
unit, flashing LED signal lamp with