Honsberg LABO-D-I - Frequency Switch

Detection
distance
Magnetic field
sensor
Depending on magnets
used, signal threshold
typ. 8 Gauss
(= 0.8 milliTesla), switching distances over 25
mm possible
Pre-tensioned
hall sensor
Typ. 0.5..2.5 mm
Inductive sensor Typ. max. 4 mm
based on 1 cm³ ST37
Metering range 0..10 kHz for hall sensor
0..1 kHz for inductive sensor
Measurement
uncertainty
±0.1 % measured value
Pressure resistance
Pressureless application
Operating
temperature
0..+70 °C
(other temperatures available on request)
Storage
temperature
-20..+80 °C
Materials Housing CW614N nickelled
Sensor flap PA
Plug insert PC
Contacts CuZn, gold-plated
Supply voltage 10..30 V DC
Power
requirement
< 1 W (for no-load output)
Switching output Transistor output "push-pull"
(resistant to short circuits and reversed polarity protected) lout = 100 mA max.
Display yellow LED
(On = Normal / Off = Alarm /
rapid flashing = Programming)
Electrical
connection
For round plug connector M12x1, 4-pole
Ingress protection IP 67
Weight approx. 0.02 kg
Conformity CE