Marka	Honsberg
Ürün	Screw In Transmitter
Ürün Kodu	LABO-D-V
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Sensor Magnetic field sensor (magneto-resistive) Pre-tensioned hall sensor Inductive sensor Detection distance Magnetic field sensor Depending on magnets used, signal threshold typ. 8 Gauss (= 0.8 milliTesla), switching distances over 25 mm possible Pre-tensioned hall sensor Typ. 0.5..2.5 mm Inductive sensor Typ. max. 4 mm based on 1 cm³ ST37 Metering range 0..10 kHz for hall sensor 0..1 kHz for inductive sensor Measurement uncertainty ±0.1 % measured value Pressure resistance Pressureless application Operating temperature 0..+70 °C (other temperatures available on request) Storage temperature -20..+80 °C Materials Housing CW614N nickelled Sensor flap PA Plug insert PC Contacts CuZn, gold-plated Supply voltage 10..30 V DC with voltage output 10 V: 15..30 V DC Power requirement < 1 W (for no-load output) Output data: all outputs are resistant to short circuits and reversal polarity protected Current output: 4..20 mA (0..20 mA available on request) Voltage output: 0..10 V (2..10 V available on request) Output current max. 20 mA Frequency output: Transistor output "push-pull" lout = 100 mA max. Pulse output: Transistor output "push-pull" lout = 100 mA max. Pulse width 50 ms Pulse/quantity is to be stated Display Yellow LCD shows Operating voltage (LABO-D...I / U) or Output status (LABO-D...F / C) (rapid flashing = Programming) Electrical connection for round plug connector M12x1, 4pole Ingress protection IP 67 Weight approx. 0.02 kg Conformity CE