Martens TTM-00xW Series - Temperature Controller

Power supply
Supply voltage : 100..240 V AC, -15%, +10% or
24 V AC/DC, +-10; 50/60 Hz
Power consumption : < 10 VA at 240 V AC
CE-conformity : EN 61326-1:2013; EN 61010-1:2010
Certification : UL3121-1 (UL/CUL)
Measuring input
Pt100 : Pt100/JPt100 range -199(.9)..500(.0) °C
2- or 3-wire connection
Thermocouple
Type J : Fe-CuNi -200..+850/-199.9..+850.0 °C
Type K : NiCr-Ni -200..+1372/-199.9..+990.0 °C
Type N : NiCrSi-NiSi -200..+1300/-199.9..+990.0 °C
Type R : PtRh-Pt87/13 0..1700°C
Type S : PtRh-Pt90/10 0..1700°C
Type T : Cu-CuNi -200..+400/-199.9..+400.0 °C
Type B : Pt30Rh/Pt6Rh 0..1800 °C
break of sensor, built-in cold junction
Voltage : 0/1..5 V DC -1999..+9999 Digit
Current : 4..20 mA -1999..+9999 Digit
Sensor correction : programmable
Accuracy : ± 0.3 % +1 digit of the measuring range
Sampling rate : 0.25 s
Output
Electronic : 0/12 V DC bistable, max. 20 mA, > 600 Ω
Relay : process output <250 V AC <250 VA <3 A
alarm output <250 V AC <250 VA <2.4 A
Continuous : 4..20 mA, burden max. 600 Ω
Interface
Phyiscally : RS485
Protocol : Toho / MODBUS (RTU, ASCII)
Baud rates : 1200, 2400, 4800, 9600, 19200 bps
Display
Process value : LED 4-digit white 10 or 14 mm
Set value : LED 4-digit green 8 mm
Decimal point : programmable
Status indicator : LED red or green
Case
Dimensions HxWxD
TTM-004W : 48x48x77 mm DIN48x48
TTM-005W : 48x96x76.5 mm DIN48x96
TTM-009W : 96x96x77 mm DIN96x96
Protection class : front IP65
Terminals : screw terminals max 2.5 mm²