Marka	Pavone
Ürün	DAT 200 PROFIBUS DP Weight Transmitter
Ürün Kodu	-
Artikel	PSDA0901
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

The weight transmitter DAT 200 Profibus gurantees high performance and long-term reliability. Configuration and calibration can be set up directly from the front panel. The weight transmitter DAT 200 Profibus can be connected directly to the Profibus DP fieldbus. The contained dimensions allow to place a large number of transmitters within the electrical panels automation. The DAT 200 Profibus product is interfaced with Intrinsically safe barriers for use in hazardous areas. It has two red status LEDs, 3 mechanical buttons behind the red door and screw terminal blocks.

Technical Specifications

Measuring range: -4 ÷ +4 mV/V

Input sensitivity: 0.02 µV/count

Full scale non-Linearity: < 0.01%

Gain drift: < 0.001% FS/°C

Display: 5 digit, red LED (7 segments), h 7 mm

A/D Converter: 24 bit

Internal Resolution: > 16.000.000 points

Trasducer input voltage: 4 V (max 4 cells 350 Ohm)

Visible resolution (in divisions): 60 000

Divisions value (adjustable): 0.001 ÷ 50

Temperature range: -10 ÷ +50°C (max umidity 85% without condensation)

Storage temperature: -20 ÷ +60°C

Filter: 0.02 ÷ 25 Hz

Serial port: RS232C half duplex with ASCII protocol

Power supply: 24 Vcc ±10% – power 2 W

Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for electrical security

Baud rate fieldbus: 9.6 K/sec ÷ 12 Mbit/sec

Fieldbus: Profibus DP-V1

Baud rate: 2400 ÷ 115200 adjustable

Transmission distance: 15 m