Marka	Pavone
Ürün	DAT 1400 PROFIBUS + ANALOG
Ürün Kodu	-
Artikel	PSDA1470
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

The DAT 1400 Analog + Profibus DP weight transmitter has a mechanical keyboard, removable screw terminal blocks and a peak hold function for dynamic measures. It has the ability to integrate different options based on customer needs. For example, among future options there is the analog input which can be in tension or electrical and the RS485 connection to external smart junction box. The Software Optimation is given for free. This Software allows you to run certain activities such as calibration or monitoring directly from your computer. The Optimation software is provided by Pavone Systems and guarantees a perfect instrument run.

Technical Specifications

Measuring range: -3.9 ÷ +3.9 mV/V

Input sensitivity: 0.02 µV/count

Full scale non-Linearity: <0.01%

Gain drift: < 0.001% FS/°C

Display: 6 digit, 7-segment LED red, height 14mm

A/D Converter: 24 bit

Internal Resolution: > di 16.000.000 points

Frequency signal acquisition: 12 ÷ 1000 Hz

Visible resolution (in divisions): 999999

Divisions value (adjustable): x1, x2, x5, x10, x20, x50

Decimal figures range: 0 ÷ 4

Temperature range: -10 ÷ +50°C (max umidity 85% without condensation)

Storage temperature: -20 ÷ +70°C

Filter: 0.5 ÷ 1000 Hz

Excitation voltage: 5 Vdc (max 8 -350 Ohm- load cells)

Logic output: 2 optoisolated outputs; max 24 Vdc/100 mA each

Logic input: 2 optoisolated inputs 24 Vdc PNP (external power supply)

Serial port: 1 USB device + 1 RS232C + 1 RS485/Fieldbus; ASCII or Modbus RTU protocol

Analog output Non-Linearity: < 0,02%

Temperature drift analog output: 0,001% FS / °C

Power supply: 12 ÷ 24 Vdc ±15% - power consumption 5 W

Microcontroller: ARM Cortex M0 + 32 bit 256KB Flash reprogrammable onboard via USB

Data storage: 64 Kbytes expandable up to 1024 Kbytes (optional)

Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety