Marka	Pavone
Ürün	UWT 6008 ANALOG
Ürün Kodu	-
Artikel	PSDA6005
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

The UWT 6008 Analog weight transmitter has been designed by Pavone Systems. This weight trasnsmitter is a unique product since it is suitable to all industrial applications where it is necessary to know the load distribution on the different cells. The UWT 6008 Analog is able to monitor all load cells and generate alarms due to excessive cell signal drift, missing connections, failures in load cells and unbalanced weight distribution. The emulative control allows the weighing system to work even when a load cell is broken, until its replacement. The Software Optimation is given for free. This Software allows you to run certain activities such as calibration or monitoring directly from your computer. The Optimation software is provided by Pavone Systems and guarantees a perfect instrument run.

Technical Specifications

Measuring range: -3.9 ÷ +3.9 mV/V

Input sensitivity: 0.02 µV/count

Full scale non-Linearity: <0.01%

Gain drift: < 0.001% FS/°C

Display: 128 x 64-pixel graphic LCD

A/D Converter: 24 bits

Internal Resolution: > 16.000.000 points

Trasducer input voltage: 5 Vdc (230 mA max.)

Frequency signal acquisition: 12.5 ÷ 300 Hz

Visible resolution (in divisions): 999999

Divisions value (adjustable): x1, x2, x5, x10, x20, x50

Decimal figures range: 0 ÷ 4

Temperature range: -10 ÷ + 50°C (humidity max 85% no condensation)

Storage temperature: -20 ÷ +70°C

Filter: 5 ÷ 250 Hz

Logic output: 2 relays, Max. 48 Vac/Vdc, 2A each

Logic input: 2 opto-isolated at 12/24 Vdc PNP (external power supply)

Serial port: 1 USB device + 1 RS232C + 1 RS485

Analog output Non-Linearity: < 0,02%

Temperature drift analog output: 0,001% FS / °C

Power supply: 12-24 Vdc ±15% - Power consumption 4 W

Microcontroller: ARM Cortex M0+ at 32 bits, 256KB Flash reprogrammable on-board from USB

Data storage: 64 Kbytes expandable up to 1024 Kbytes

Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety, EN45501 for metrology

Number of load cells: 1 ÷ 8

Analog output: 16-bit opto-isolated Voltage: 0 ÷ 5/10 V (min. R: 10 K Ohm), Current: 0/4 ÷ 20 mA (max. R: 300 Ohm).

Dimensions: 100 x 75 x 110 mm (L x H x P)