| Marka | Unimec |
|---|---|
| Ürün | Unimec TPR-00306 Reducer |
| Ürün Kodu | TPR-00306 |
| Artikel | - |
| Ülke | United States (US) |
| Durumu | Yeni / Kullanılmamış |
| material | Normative | Specification | Indications | |
|---|---|---|---|---|
| Worm | 16NiCr4 | EN 10084: 2008 | Case hardening alloy steel | Casehardened and ground on teeth and holds |
| Worn wheel | CuAl10Fe2-GM | EN 1982: 2008 | Aluminum bronze | Chill molded |
| Threaded spindle | C45 | EN 10083-2: 2006 | Carbon steel | Tr 30x6 (ISO 2901: 2016) - Rolled or machined |
| Carter | GJL 250 | EN 1561: 2011 | Gray cast iron | Completely machined on 6 faces |
| Lubricant | Unimec Mark CA | Calcium based grease | 0.3 kg |
| Operating temperature [C] | -10 C / 80 C |
|---|---|
| Static load (traction or compression) | 40 kN |
| Dynamic load (traction or compression) | 25 kN |
| Maximum input speed | 1800 rpm |
| Main gearbox weight | 10 kg |
| Trapezoidal screw weight | 5 kg / m |
| Anti-rotation torque at maximum load | 63 Nm |
| Maximum admissible static lateral loads | 0 N |
| Center-to-center diameter | 50 mm |
| Maximum radial load on worm | 450 N |
| Standard working conditions | 25 C - servizio 10% |
| Nominal ratios | |||
|---|---|---|---|
| 1/5 | 1/10 | 1/30 | |
| Real ratio | 1 / 4.75 | 1 / 9.67 | 1/30 |
| Translation per worm revolution | 1.26 mm | 0.62 mm | 0.2 mm |
| Efficiency | 30% | 26% | 18% |
| Start-up efficiency | 21% | 18% | 13% |
| Maximum linear speed | 2160 | 1080 | 360 |
| Torque at maximum load | 16 Nm | 9.3 Nm | 4.4 Nm |
| Worm screw maximum torque | 69 Nm | 154 Nm | 183 Nm |
| Idle torque | 0.4 Nm | 0.3 Nm | 0.25 Nm |
İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.
Türkiye' nin Her Yerinden44448 19Pazartesi - Cuma
08:00 - 18:00
Hafta sonu kapalı.
Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.
+90 506 875 44 15